As OEM designs pack more power and more circuitry into smaller enclosures, two connector needs keep coming up on the same production line: a compact, reliable connection point on the PCB itself, and a separate connector rated to carry high current without heating up. Very few stalls at Electronica Expo cover both, which is exactly why Ox Connections is bringing its PCB connectors manufacturer range and high-current connectors for OEM line to the same table this year.
Why PCB and High-Current Connectors Are Both in Demand
A single appliance or industrial control panel often needs a small board-mount connector for signal and logic circuits, alongside a heavier-duty connector to carry the main power supply. Sourcing these from two separate vendors usually means two sets of lead times, two quality checks, and two people to call when something changes mid-project. OEMs evaluating an industrial power connectors supplier for a new design increasingly prefer one partner who can quote both parts of the harness together.
Ox Connections at Electronica Since 2008
Ox Connections is a wire harness manufacturer with our office and factory in Bangalore, and we have exhibited at Electronica every year since 2008. Over that time we have supplied multiple OEMs across India, working directly on both signal-level and power-level connector requirements within the same harness assembly. This Electronica Expo stall reflects that dual capability rather than splitting it across two separate product lines.
On the Stall: PCB Connectors
Our PCB connectors manufacturer range covers board-mount headers and receptacles used to terminate wiring directly onto control boards inside compact enclosures. These are built to hold their position through vibration and repeated connector cycles without loosening the solder joint underneath. Samples across multiple pitch sizes will be available to handle at the stall.
On the Stall: High-Current Connector Range
Alongside the PCB range, we will be showing our high-current connectors for OEM applications, rated for the heavier current draw seen in power supply units, battery packs, and motor drive circuits. Each connector in this range is built with contact materials and housing sizes chosen specifically to manage heat at sustained current loads. Our team can walk through de-rating charts and housing options for your specific load profile.
Questions We Can Answer at the Stall
OEM teams visiting an industrial power connectors supplier stall usually arrive with the same set of questions: what current rating fits a given wire gauge, whether a connector needs additional heat management, and how quickly a custom pitch or pin count can be turned around. Bring your current drawings or part numbers to Hall 5, E15, and the Ox Connections team can answer these directly instead of over email.
Find Us: Hall 5, Stall E15
The show runs from 16 to 18 September 2026 at BIEC, Bangalore. The Ox Connections stall is located in Hall 5, Stall E15, and our full technical team will be present across all three days to go through both the PCB and high-current ranges in detail.
Let’s Talk PCB and Power
If your next OEM project needs both board-level and power-level connectors, OxConnections would like to meet your team at Electronica Expo. Visit Hall 5, E15 to see the PCB connectors manufacturer and high-current connectors for OEM ranges together, and find out how a single supplier can cover both ends of your harness.
Leave A Comment